Zanussi Electrolux Built-in oven Instruction Book - page 6
68
Once the oven has been installed :
the numbers on the display will flash and
indicate "12.00". If no button is pressed
in 10 seconds, the numbers will stop
flashing and the clock will start running
from 12.00.
To set the correct time of day :
if numbers are flashing, press button 5
or 6. When the correct time is displayed,
confirm the setting by pressing button
4. The clock will start running.
if numbers are static, press button 8 and
9 at the same time and keep them
pressed until the numbers start flashing.
Then proceed as described above.
Then, select the conventional cooking
function ( ):
press button 1 to switch on the oven.
press button 2 twice. The pilot light to
the left of symbol will come on.
Allow the oven to run empty for
approximately 45 minutes.
open a window for ventilation.
During this time, an unpleasant odour may
be emitted. This is absolutely normal, and
is caused by residues of manufacturing.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy
water.
Before cooking for the first time,
carefully wash the shelf and the
dripping pan.
To open the oven door, always
catch the handle in its central part
(Fig. 1).
When the oven is first installed
Fig. 1
FO 0799