Zebra MZ series Installation And User Manual - page 4
Wall Mounting
Use the dimensions in Figure 3 to determine the best loca-
tion for mounting the MZ Power Station on a wall. Remember
to retain a minimum of 1.75 inches [44.5 mm] clearance above
the Power Station for removing and inserting printers as noted
above. When choosing a location please observe all the safety
precautions included in this manual.
Due to the many attachment variations that may be encountered in
hanging the MZ Power Station form a wall, Zebra cannot supply or
recommend specific mounting hardware. Selection of the correct
hardware is the responsibility of the installer.
Zebra is not responsible for any personal or property damage
resulting from improper installation of the MZ Power Station.
Figure 3: Dimensions for Wall Mounting
4
MZ Power Station Installation and User Guide
10.0” [254.0 mm]
3.65”
[92.7 mm]
19.62” [498.35 mm]
3.25”
[82.5 mm]
.104” [2.6 mm] R
0.50” [12.7 mm]