Zebra MZ series Installation And User Manual - page 6
charging process. (Refer to the following pages and to figure
5. )
Charge Status Indicators
When the printer is installed in the Power Station, the
Green/Amber indicator to the right of the Power Button indi-
cates the status of the printer’s built-in charger:
• The indicator is off indicates the battery is not being
charged.
• If the indicator is amber the battery is being charged.
• If the indicator is green, the battery is fully charged.
The
Green Indicator between the Power and Feed buttons
has two states:
• A rapidly blinking light indicates a low battery condition.
• A steadily lit indicator means that power is on and the
battery charge level is sufficient for use.
Approximate Charge Times :
Batteries are fully charged after 2.5 hours from the low-bat-
tery shut-off state. Partially discharged batteries will take less
time to charge.
Notes: Do not use the printer when installed in the Power Station.
Charge times are for completely discharged batteries.
As a safety feature the battery will stop charging after 4.5
hours regardless of the battery’s charge state.
6
MZ Power Station Installation and User Guide