Zebra QK 220 User Manual - Wlan Overview

41

QL Series User Guide

WLAN Overview

All QL Series printers can be equipped with a radio in the

standard PCMCIA footprint using the industry standard 802.11

or 802.11b protocol. QL Series printers will have the FCC I.D.

number of the radio on the product label.  QL Plus Series print-

ers will have the FCC ID number on the serial number label on

the back of the unit.

These printers allow wireless communication as a node

within a local area network, (LAN) and its wireless capabilities

allow communications from any point within the LAN’s perim-

eter.  Methods of establishing communications to the printer

will vary with each LAN application.

QL 220 and QL 220 Plus Wireless Network Printers with the

CF module can be identified by the text “Wireless Network

Printer” and  FCC ID: I28MD-QL4137 either on the front of the

unit (QL 220) or on the label on the back of the unit

(QL 220 Plus).

QL 320 and QL 420 printers with the PCMCIA module can be

identified by the text “Wireless Network Printer” and  FCC ID

number I28-QL420352 either on the front of the unit

(on QL 320 and QL 420) or on the label on the back of the unit

(on QL 320 Plus and QL 420 Plus).

QL 320 and QL 420 printers with the Frequency Hopping

PCMCIA module can be identified by the text “Wireless Net-

work Printer” and  FCC ID: I28MD-QL3201 on the front of the

unit.

Methods of establishing communications to QL Series print-

ers  will vary with each LAN application.  General information

on establishing WLAN communications can be found in either

the ”CPCL  Programmers Manual” or the “Quick Start Guide

for Mobile Wireless Printers” both available on-line at:

http://www.zebra.com/manuals

More information and LAN configuration utilities may also be

found in  Zebra’s Label Vista™ program (version 2.8 and later).

Label Vista may be downloaded from the Zebra Web site at:

http://www.zebra.com/SD/product_LabelVista.htm

continued