Zebra QK 220 User Manual - Using The Accessories

43

QL Series User Guide

Using the Accessories

Belt Clip

Refer to Figure 15. All QL Se-

ries printers are equipped with a

belt clip as standard.  To use:

hook the clip over your belt, and

ensure that the clip is securely

attached to the belt.  The belt

clip will pivot to allow you to

move freely while wearing the

printer.

The retainer for the Belt Clip

has a strain relief feature which

can be used with the communi-

cations cable. Refer to the sec-

tion on Connecting the Printer.

Kickstand

Refer to Figure 16 . The Kickstand option allows users to use

the printer on a desktop.  To use the optional Kickstand:  Flip

the Kickstand on the back of the printer open until you feel a

slight detent. The printer will now sit at approximately a 30º to

45° angle on a desktop depending on the printer model.

The retainer for the

Kickstand has strain

relief features which

can be used with the

communications ca-

ble. Refer to the sec-

tion on Connecting

the Printer.

continued

Clip printer

to belt

Printer can

pivot freely

Figure 16: Using the Kickstand

Figure 15: Using the Belt Clip