Zebra QK 220 User Manual - Label Specifications

65

QL Series User Guide

Label Specifications

QL220/220 Plus

QL320/ 320 Plus

QL420/420 Plus

Label/Tag Width

.75 in. to 2.12 in.

1.5 in. to 3.1 in.

2 in. to 4.1 in.

 (16 to 53.8 mm)

 (38.1 to 78.4 mm) (50.8 to 104.1 mm)

Max. Label/

20 in. (508 mm)

16 in. (406.4 mm)

20 in. (508 mm)

Tag Length

(w/std. memory)

Inter-label Gap.

0.08 in. to 0.16 in. (.12 in. preferred)

(2 mm to 4 mm [3 mm preferred])

Label Thickness

.0025 in to .0065 in (.064 mm to .165 mm)

Tag Thickness

.0060 in. (.152 mm) maximum

Max. Label Roll dia.

2.2" (55.9 mm) O.D

2.625 in. (66.7 mm) O.D.

Label Inner Core

0.75 in. (19 mm) minimum dia;

1.38 in. (35.05 mm) minimum dia for linerless media

(QL420 accepts linerless media on 0.75 in. cores.)

Black Mark

The reflective media black marks should

Dimensions

extend past the centerline of the roll.

Media

Minimum mark width: 0.5 in. (12.7mm)

Requirements

perpendicular to edge of media, centered within

the width of the roll.

Mark length: 0.094 in. (2.4 mm) parallel to edge of media

Use Zebra brand direct thermal media that is outside wound. Media may be reflective

(black mark) sensing, or transmissive (gap) sensing, die-cut, continuous,  or linerless.

QL 420 models will accept fanfold media if used with an external media supply.

For die-cut labels, use only full auto dies.