Zebra QL 320 User Manual - Operator Controls

QL 320 User’s Guide

13

Operator Controls

The QL 320 will come with one of two possible control panels.

The standard control panel is detailed below and in Figure 8.  The

optional control panel (Figure 9)  features an LCD which allows

easy display and selection of many printer functions and is de-

tailed on following pages.

Standard Keypad

The standard keypad has three control buttons and two multi-

purpose indicators.

• The Power button turns the QL 320 on and off.

• The Feed button advances a length of media which is de-

termined by the type of media being used.  Label media will

be advanced to the next gap or bar sense marker.  Journal

(plain) media will be advanced a length determined by the

printer’s software.

• The Function button is controlled by a printer’s specific ap-

plication to support such functions as:

Print a battery Level reporting

Print the Local Area Network (LAN) status

Print a Short Range Radio Frequency (SRRF) status

Print a Media supply report

The green LED on the left side of the control panel indicates

the status of several printer features:

• A slowly blinking sequence indicates the printer’s battery

needs charging.

• Printers with a wireless QuickLink module installed: a quick-

ly blinking sequence indicates the printer has not estab-

lished a link to either a Local Area Network  or a compatible

wireless equipped terminal.

• Printers with a wireless QuickLink module installed: A

steadily lit indicator shows that the printer has established a

wireless link, either to the LAN or to a compatible terminal.

A steadily lit green indicator on a non-wireless printer is a

power-on indicator.

The yellow LED on the right side of the control panel has two

indication conditions.

• A rapidly blinking yellow LED and a chime indicate that no

application has been loaded into the printer.

• Printers with a wireless QuickLink module installed: a rapid-

ly blinking LED indicates normal  data transmission.