Zebra QL 320 User Manual - Objects Into The Printer.
QL 320 User’s Guide
29
Preventive Maintenance
WARNING: To avoid possible personal injury or
damage to the printer, never insert any pointed or sharp
objects into the printer.
Extending Battery Life
• Never expose the battery to direct sunlight or temperatures
over 104
∞
F (40
∞
C).
• Always use a Zebra charger designed specifically for Li-
thium-Ion batteries. Use of any other kind of charger may
damage the battery.
• Choose the media that is easiest to “burn.” An authorized
Zebra re-seller can help you determine the optimum media
for your application.
• If you print the same text or graphic on every label, consid-
er using a pre-printed label.
• Choose the correct print darkness, and print speed for your
media.
• Use software handshaking (XON/XOFF) whenever possi-
ble.
• Select Tear-Off mode whenever possible (Peel-Off mode
uses more power).
• If your printer has the optional LCD display: Use the display
backlight only when necessary. Turn it off whenever it is not
needed. The LCD backlight consumes a great deal of pow-
er.
• Pull the battery out of the printer if the printer won’t be used
for a day or more and you’re not performing a maintenance
charge.
• Consider purchasing an extra battery.
• Remember that any rechargeable battery will lose its ability
to maintain a charge over time. It can only be recharged a
finite number of times before it must be replaced.