Zebra QL 320 User Manual - Label Specifications

QL 320 User’s Guide

39

Label Specifications

Label/Tag Width

1.5" to 3.1" (38.1 mm to 78.4 mm)

Max. Label/

16" (406.4 mm) with standard memory

Tag Length

Inter-label Gap.

.08" to .16" (.12" preferred)

2 mm to 4 mm (3 mm preferred)

Label/Tag Thickness

.0025” to .0065” (.064 mm to .165 mm)

Label Roll Size:

Max. Diameter

2.625" (66.7 mm) O.D.

Inner Core

.75" (19 mm) std, 1.38” (35.05 mm) optional

Diameter

Use Zebra-brand direct thermal media that is outside

wound. Media may be reflective (black mark) sensing or

transmissive (gap) sensing, die-cut, continuous or

linerless.

For die-cut labels, use only full auto dies.

The reflective media black marks should extend past

Media Requirements

the centerline of the roll.

Minimum Black Mark Dimensions:

Mark width: 0.5” (12.7mm) perpendicular to the edge of

the media, centered within the width of the roll.

Mark length: 0.094” (2.4 mm) parallel to the edge of the

media.

Font/Bar Code Specifications

Fonts Available

Five resident scalable and rotatable fonts available

from 12-48 pt.

Downloadable pre-scaled fonts via Label Vista™

software

Optional international character sets

Codabar

UCC/EAN 128

Code 39

1D Bar Codes Available

Code 93

EAN 8/JAN 8, 2 and 5 digit extensions

EAN 13/JAN 13, 2 and 5 digit extensions

lnterleaved 2 of 5

MSI/Plessey

FIM/POSTNET

UPC-A, 2 and 5 digit extensions

UPC E, 2 and 5 digit extensions

2D Bar Codes Available

MaxiCode

PDF 417

Rotation Angles

0

∞

, 90

∞

, 180

∞

, and 270

∞