Zebra QL 320 User Manual - Unpacking and Inspection

QL 320 User’s Guide

7

Introduction

Thank you for choosing our Zebra QL 320 Mobile Printer. This

rugged printer is sure to become a productive and efficient addi-

tion to your workplace thanks to its innovative design. Because it’s

made by Zebra Technologies Corporation, you’re assured of

world-class support for all of your bar code printers, software, and

supplies.

• This user’s guide gives you all the information you’ll need to

operate the QL 320 printer.

• The QL 320 uses the CPL programming language.  To cre-

ate and print labels using the CPL language, refer to the

Mobile Printer Programming Guide and our Label Vista™

label creation program.

• The QL 320 has an optional interpreter for the ZPL II

®

 Pro-

gramming Language which interprets commands up to X.8

firmware.  The printer must be equipped with the optional

memory upgrade and appropriate application in order to

use this function.  A ZPL II Program Guide (part #46530L)

can be used as reference for the ZPL II label design pro-

gramming language.  If either manual was not ordered with

the printer, simply call your re-seller or Zebra Technologies

Corporation or visit the Zebra web site..

Unpacking and Inspection

Inspect the printer for possible shipping damage:

• Check all exterior surfaces for damage.

• Open the media cover (refer to “Loading the Media” in the

Getting Ready to Print section) and inspect the media com-

partment for damage.

In case shipping is required, save the carton and all packing

material.

Reporting Damage

If you discover shipping damage:

• Immediately notify and file a damage report with the ship-

ping company. Zebra Technologies Corporation is not re-

sponsible for any damage incurred during shipment of the

printer and will not cover the repair of this damage under its

warranty policy.

• Keep the carton and all packing material for inspection.

• Notify your authorized Zebra re-seller.