Zebra QL 320 User Manual - Intended Manner.

QL 320 User’s Guide

25

Wireless Local Area Network (WLAN)

 WARNING: Use of the QL 320  will result in

exposure to Radio Frequency radiation. To conform to

FCC RF exposure requirements the printer must be

used only in the intended orientation and in the

intended manner.

Printers equipped for Wireless Local Area Network (WLAN)

communications using the industry standard 802.11 or 802.11b

protocols are known as QL 320N Printers.  These  printers allow

wireless communication as a node within a local area network,

and its wireless capabilities allow communications from any point

within the LAN’s perimeter.  Methods of establishing communica-

tions to the QL 320  will vary with each LAN application.

QL 320N  printers can be identified the model number on the

front of the unit.

The QL 320N  is designed for use with either a shoulder strap

and a specially designed soft case, or with a belt clip.  The printer

should be oriented on the operator’s hip so that printed material is

transported 

away from the operator.

When the QL 320N  is used as designed, either the printer’s soft

case or the belt clip will allow use of the printer in the manner

mandated by the FCC.