Zebra R 2844-Z User Manual - Adjusting The Guides
Other manuals for R 2844-Z:
Product Brochure, Supplementary Manual, Parts Catalog, Quick Reference Manual, User manual
Manual is about: Smart Label Printer and Encoder
of
86
Adjusting the Guides
The adjustable guides direct the media
toward the platen and print head.
1. Open the media guides by turning the
guide adjuster knob to the rear.
2. Thread the media through the guides.
3. Close the media guides by turning the
guide adjuster knob to the front. They
should just touch, but not restrict, the
edges of the media.
4. Unless you need to load ribbon, close
the top cover. Remember that you
need to release the cover lock, lower
the top cover, and press down until the
latches snap into place.
10
980476-001A