Zebra R 2844-Z User Manual - Removal
Other manuals for R 2844-Z:
Product Brochure, Supplementary Manual, Parts Catalog, Quick Reference Manual, User manual
Manual is about: Smart Label Printer and Encoder
of
86
Replacing the Platen
Removal
Open the printer and remove any media.
1. Using a pointed stylus (such as
tweezers, small slot-head screwdriver,
or razor-knife), unhook the tabs on the
right and left sides. Then rotate them
forward.
2. Lift the platen out of the printer’s
bottom frame.
Assembly
Make sure the right bearing is on the shaft
of the platen.
1. Align the platen with the gear to the
left and lower it into the printer’s
bottom frame.
2. Rotate the tabs back and snap them
into place.
56
980476-001A
MOVIE