Zebra TLP-2844 User Manual - Printer.

Attaching Power Supply

Check the power supply to make certain it is appropriate for your input

voltage.

Warning: Use the power supply that came with your

printer.

Never operate the printer and power supply in an

area where they can get wet.  Serious personal

injury could result!

1. Make sure the power switch is in the off position (forward).

2. The DC power supply has a barrel connector on one end that must be

inserted into the power supply receptacle on the back of the printer.

3. Insert the separate AC power cord into the power supply.

4. Plug the other end of the cord into an appropriate AC electrical outlet.

8

980485-001A

Plug

Varies by

Country

AC

Power

Cord

Power

Supply

Power

Switch

Power

Supply

Receptacle

Barrel

Connector