Zebra TLP-2844 User Manual - page 23

Media Length Sensing

Before you connect the printer to your computer, make sure that the printer

is in proper working order.  You can do this by making the printer measure

media and print a status printout.

After loading media, perform the

following procedure that measures the

length of each label or tag.  Make sure the

top cover of the printer is closed.

1. Make sure that printer power is off.

2. Press and hold the feed button.

3. Turn printer power on.

4. When the status light blinks, release

the feed button.

5. The printer advances the media to

measure and verify the length of

individual labels or tags.  The printer

then prints a status summary and

remains in diagnostic dump mode.

6. To begin normal operation, tap the

feed button.  The printer prints "out of

DUMP" and advances a label.

If the status light remains amber or red or

you cannot get this printout, refer to

Troubleshooting on page 35.

980485-001A

15

UKQ2933H U V4.28.19

1032

0.9

331

mem:000K,0331K avl

JF WY

2 07

24

1200 1500

oRO

06 10 16

Serial port : 96,N,8,1

Image buffer size:

K

Fmem:000,0K,06

K avl

Gmem:000K,0

K avl

E

I8,0,001 rY

S D

R0

,000 ZT UN

q

Q

,036

Option:

now in DUMP

out of DUMP

MOVIE