Zebra TLP-2844 User Manual - page 18

Placing the Roll in the Media Compartment

Whether your roll media is inside or

outside wound you load it into the printer

the same way.

1. Open the printer.  Remember that you

need to pull the release levers toward

the front of the printer.

2. Remove the outside length of media.

During shipment, the roll may become

dirty when handled or dusty when

stored.  Removing the outside length

avoids dragging adhesive or dirty

media between the print head and

platen.

3. Separate and hold open the media

hangers.

4. Orient the media roll so that its

printing surface will be up as it passes

over the platen.

5. Lower the roll between the hangers

and close them onto the core.

10

980485-001A

MOVIE