2Wire 2710HGV-TNZ User Manual - page 23
of
86
23
4. Click
Edit Blocked/Allowed Device List
; the Wireless MAC Filtering page opens (
Figure 17
).
Note: Make sure that the Enable checkbox is not selected.
5. Enter the MAC address automatically or manually.
- To enter the address automatically, click
Rescan For Devices; the MAC addresses of the
allowed devices populated in the Allowed Devices pane as shown below.
- To enter the address manually, enter the MAC address in its field using this format, for
example, 00:1B:5B:90:F4:80, then click
Add to List. The address you entered appears in the
Allowed Devices pane.
6. Click
Save.
Figure 17: Wireless MAC Filtering page