2Wire 2710HGV-TNZ User Manual - page 56
56
5. Scroll down and click
Add a new user-defined application
; the Firewall Application Profile Definition
page opens (
Figure 45
).
Figure 45: Firewall Application Profile Definition Page
6.
Enter the application profile name in the
Application Profile Name
field.
Notes: For easy identification, use the name of the application you are using.
Clicking
Back
returns to the Allow device application traffic to pass through
firewall page.
7. Create a definition for your application that is to be allowed through the firewall.
− In the
Protocol
field, select the
TCP
or
UDP
radio button. If the application you are adding
requires both, you need to create a separate definition for each.
− In the
Port (or Range)
field, enter the port or port range the application uses. For example,
some applications requires only one port to be opened (such as TCP port 500); others
require that all TCP ports from 600 to 1000 be opened.