2Wire 2710HGV-TNZ User Manual - page 72
of
86
72
4. Click
Wired Interfaces
; the Ethernet Switch page opens (
Figure 60
).
Figure 60: Ethernet Switch Page
5. Select the
Ethernet Networking checkbox to enable the switch setting.
6. Select one of the following values from the drop-down lists to the match the intended Ethernet port.
-
Auto-detect
-
100BaseTX Full-Duplex
-
100BaseTX Auto
-
10BaseT/UDP Full-Duplex
-
10BaseT/UDP Auto
7. Click
Save.