2Wire 2710HGV-TNZ User Manual - page 24
of
86
24
Allowing Individual Devices
This section provides instructions to allow individual devices. To allow all devices, refer to
Allowing all
Devices
.
To allow individual devices:
1. Open a Web browser and enter http://gateway.2Wire.net to access the gateway user interface.
2. Click on the Home page; the Wireless Access Point List and Unique Settings page opens.
3. Scroll down to the MAC Filtering pane.
4. Click
Edit Blocked/Allowed Device List
; the Wireless MAC Filtering page opens (
Figure 18
).
Figure 18: Wireless MAC Filtering page
Note: Make sure that the Enable checkbox is selected; otherwise, the device will not be
allowed.