2Wire 2710HGV-TNZ User Manual - page 78
78
3. Click
Link Configuration
; the Link Configuration page opens.
4. Scroll down to the PPP Authentication and Settings pane.
5. Enter your user name in the Username field (this is given to you by your service provider).
6. Enter your password in the Password field (this is given to you by your service provider).
7. Re-enter your password in the Confirm Password field.
8. Enter a value for the length of time you want the PPP session to remain active in the PPP on
Demand field.
-
Setting the value to
0 indicates that the PPP session will remain on all the time.
-
Setting the value between
1 to 10080 minutes, the PPP session will time-out accordingly if the
gateway does not detect outbound traffic destined for the Internet in the specified time.
9. Click
Save.
Modifying Broadband IP
Note: This feature is NOT currently supported on the Telecom Broadband Network
By default, the gateway automatically obtains its broadband IP address via DHCP.
To manually modify the broadband IP:
1. Open a Web browser and access the gateway user interface by entering http://gateway.2wire.net.