2Wire 2710HGV-TNZ User Manual - page 43
43
3. Select the
Remote Access
checkbox to enable the remote access feature
4. Select the
Access shared files
checkbox if you want to enable the shared files feature.
5. Click
Edit Domain Name
to enter your domain name that you will need to enter.
Note: You will need to enter this domain name into a Web browser when you
access your system remotely.
6. Enter a password containing at least eight alphanumeric characters in the
Enter new password
field.
Note: You will need to enter this password when you access your system
remotely.
7. Confirm your password in the corresponding field.
8. Select the
Enhanced login protection
checkbox to prevent repeated “guessing” of the Web
Remote Access password.
Note: It is recommended to leave the added security value as enabled (the
default value).
9. Select from the corresponding drop-down lists to temporarily suspend remote access after a
number of failed login attempts.
10. Change the default HTTP and SSL ports if you are hosting a Web server on your network to
avoid port conflicts with your Web server.
11. Click
Save.