3D Systems CubePro User Manual - page 12

8

3D Systems, Inc

.

UNPACKING AND SETTING UP YOUR CUBEPRO

CAUTION:  Due to the size and weight of the printer, this procedure may require more than one person .  Ensure 

there are enough people to safely and comfortably move the printer to its final location.  

NOTE: Ensure that you save all foam and packing material for the future repacking of your CubePro .  Shipping the 

printer without original packing materials may cause damage to the printer .

1 .  Carefully cut the straps (A) and then pull the tabs (B) on all four release clips .

NOTE: There is one release clip on each side of the box .

2 .  Pull the handles (A) and remove the release clips from the outer box .

B

A

A