3D Systems CubePro User Manual - page 44

40

3D Systems, Inc

.

CAD File Functions

Geometry Functions

A

Home Tab

The main tab

B

Open Model

Opens a .stl file

C

Open Model 

Assembly

Opens a multi-part 

assembly of .stl files

D

Close

Closes an open .stl file

E

Close All

Closes all open .stl files

F

Save As

Saves the current .stl file

G

Single Color

Check the box if the model 

will print using a single color

A

B

C

D

E

F

G

A

Movement 

Geometry 

Value Fields

Enter the appropriate values to 

move the model .

B

Move X Button

Once a value has been entered, 

select the button to move the 

model left or right .

C

Move Y Button

Once a value has been entered, 

select the button to move the 

model forward or backward .

D

Auto Place

Auto Place the model to the center 

of the print area .

E

Move Model

Once this button has been 

selected, left click on the model 

and drag it into position .

F

Scale Value 

Field

Enter the scale percentage

G

- to mm

Scale the 3D model to the 

millimeter value entered in the 

field.

H

+ to Inch

Scale the 3D model to the inch 

value entered in the field.

I

Scale

Scale the model by the specified 

percentage .

J

Revert

Undo the scaling and revert back 

to the original size .

K

Rotate 

Geometry 

Value fields

Enter values to rotate the model

L

X

Rotate the model front-to-back on 

the X axis by the specified value.

M

Y

Rotate the model left and right on 

the Y axis by the specified value.

N

Z

Rotate the model up and down on 

the Z axis by the specified value.

O

Revert

Undo the applied rotation and 

revert to the original position . 

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O