3D Systems CubePro User Manual - page 65
Other manuals for CubePro:
User Manual, Repair Manual, Original Instructions Manual, Original Instructions Manual
Manual is about: Prosumer 3D Printer
of
89
61
3D Systems, Inc
.
6 . If the wiper blade is too high, remove the jet wiper assembly and turn the
adjustment thumbscrew (A) clockwise . Reinstall the jet wiper and return to step
5 .
7 . If the wiper tip is too low, remove the jet wiper assembly and turn the
adjustment thumbscrew (A) counter-clockwise . Reinstall the jet wiper and return
to step 5 .
8 .
Once satisfied with the adjustment, you may connect your printer to utility power
and power on the printer .
A
A