3D Systems CubePro User Manual - page 54

50

3D Systems, Inc

.

4 .  Move the model into the preferred position on the stage .

NOTE: You can specify the distance you want to move the model by 

inputing values in the Move X or Move Y fields and then selecting 

Move X

 or 

Move Y

 .

NOTE: 

Auto Place

 allows the software to place the model in an 

optimum position .

NOTE: Selecting 

Move Model

 allows you to click and drag the model 

around the stage .

5 .  If necessary, scale and rotate the model by entering the values and selecting the 

corresponding buttons .

6 .  Select the color you wish to use and then select the part .

NOTE: If working with an assembly, select a color and then the part 

you wish to change .

NOTE: If you need to replace a cartridge for a different color or 

material type, refer to the section 

Replacing A Material Cartridge

 . 

Then, verify the material type and color by reviewing the Printer 

Configuration settings under the Settings tab in the software.

7 .  Select the color again to deselect it .

8 .  Select 

Build

 . 

9 .  Enter the appropriate build settings and select 

Build

 .

NOTE: Refer to the section called 

Build Settings

 under the 

View Tab

for more information .

10 . 

Browse to the location where the file will be saved and enter a file name. Select 

CubePro Build Files

 as Save As Type . Select 

Save

 .