Summary of XT-1

  • Page 1

    Wireless fully digital communication 3m wireless communication system model xt-1 instructions for headset controls and charging batteries . . . . . . . . 2 order taking modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 change order taking mode . . . . . . . . . . . . . . ...

  • Page 2

    Instructions for headset controls and charging batteries headset controls: order taking modes see your manager to confirm which order taking mode your headset is using. (ml) manual listen • headset beeps when vehicle is detected. • tap talk button to turn on customer order point microphone and hear ...

  • Page 3

    Change order taking mode there are seven order taking modes, which offer different combinations of speaking, listening, automatic standby, vehicle detector, and order point modes. Perform the following procedure to switch to a different order taker mode: 1. Press t until the mode selection is highli...

  • Page 4

    Change basic volume settings note: all volume settings should be adjusted during normal or peak business hours. Adjusting them during slow times will likely produce volume settings that are too low. Note: inbound and outbound are always defined from the perspective of the headset. Inbound microphone...

  • Page 5

    Registering headsets each headset must be registered to a base station before it can be used. Once registered, it should not need to be registered again unless it is intentionally removed. Add headsets each headset has a unique identification number. The number is imprinted on the headset and broadc...

  • Page 6

    Change site scheduling (continued) holiday/exception schedule: the holiday/exception schedule can be used to identify up to 12 days in the year on which the store schedule is different than it would have been otherwise. The holiday/exception schedule should be updated at least once a year to ensure ...