4RF Aprisa XE User Manual - page 178
Maintenance | 177
Upgrading the terminal using TFTP
Before upgrading the terminal, ensure that you have saved the configuration file (see "Saving the
terminal's configuration" on page 66) as well as the cross connection configuration (see "Saving cross
connection configurations" on page 130).
Upgrading the terminal using the TFTP (Trivial File Transfer Protocol) server involves these steps:
1.
Run the TFTP server.
2.
Login to the Near end terminal / local terminal (see “IP addressing of terminals” on page 47).
3.
Run the TFTP upgrade process on the Remote terminal.
4.
Reboot the Remote terminal.
5.
Run the TFTP upgrade process on the Local terminal.
6.
Reboot the Local terminal.
7.
Clear the Java and web browser caches.
Step 1: Run the TFTP server
1.
Double-click tftpd32.exe (located in the TFTPD directory) from the Aprisa CD supplied with the
product. Leave the TFTPD32 application running until the end of the upgrade process.
2.
Click Settings and make sure that both SNTP server and DHCP server are not selected (no tick),
and click OK.
3.
Click Browse and navigate to the root directory on the Aprisa CD (for example, D:\) supplied with
the product, then click OK.
4.
Note down the IP address of the TFTP server (shown in the Server Interfaces drop-down list in the
TFTPD32 window) as you will need it later.