4RF Aprisa XE User Manual - page 70
Configuring the terminal | 69
SNMP trap destinations
To add a trap destination:
1.
Click on the ‘Add SNMPv1’ button to enter a SNMPv1 trap destination or click on the ‘Add
SNMPv2c’ button to enter a SNMPv2c trap destination.
The differences between SNMPv1 and SNMPv2c are concerned with the protocol operations that
can be performed. Selection of SNMPv1 and SNMPv2c must match the setup of the SNMP
manager.
2.
Enter the IP address of the server to which you want SNMP traps sent (SNMPv1 trap destination
shown). The IP address entered must be a valid dot delimited IP address.
3.
Enter the community string for the trap destination.
There is no default 'public' community string for a trap destination, but a 'public' community string
can be entered.
4.
Click Add.
To delete a trap destination:
1.
Select the trap destination you want to delete and click Delete.
2.
Click OK to delete the trap destination or Cancel to abort the delete.