4RF Aprisa XE User Manual - page 41
Other manuals for Aprisa XE:
User Manual
Manual is about: 4RF Aprisa XE fixed point-to-point digital radio link
of
272
Connecting to the terminal | 40
Configure the PC COM port settings
Terminal emulation software e.g. HyperTerminal is used to setup the basic configuration of a terminal.
The PC's COM port settings must be setup as follows:
Bits per second
115200
Data bits
8
Parity None
Stop bits
1
Flow Control
None
Start a HyperTerminal session
1.
On the PC, select Start > Programs > Accessories > Communications > HyperTerminal.
2.
Enter a name for the connection and click OK.
3.
Select the designated COM Port from the Connect Using drop-down box. Ensure it is the same
COM port that you configured earlier on your PC. Click OK.
Note: The Country/region, Area code, and Phone number information will appear automatically.