4xem BBPCHOME User Manual - 1.7. Pci Frequency Setting

Mainboard User’s Manual 

1.6. Extended Connector Board 

1.7. PCI Frequency Setting 

The PCI frequency settings are automatically set by the system 

1.8. Memory Installation 

Note:

This motherboard supports up to two double-sided or two 

single-sided DIMMs when the DDR DRAM interface is 

operating at 133 MHz. Installing DDR DIMM modules that 

exceed these specifications requires that the BIOS down-shifts 

the DRAM clocks to 100 MHz through a two-wire interface of 

the system clock generator. 

184-Pin DIMM DDR SDRAM Memory Configuration. 

Each 184-pin DIMM bank can install from 64MB up to 1GB of 

PC1600/PC2100/PC2700 compliant 2.5V single or double side 

buffered with or without ECC DDR SDRAM modules. 

Extended Connector Board 

3