4xem BBPCHOME User Manual - page 25
Manual is about: 4xem BBPCHOME: User Manual
of
77
Hardware Installation
3.5.3. Infrared (IR) Connector (IR)
This 5-pinheader connects to an optional wireless transmitting and
receiving infrared module via a cable and a bracket. Configure BIOS
to enable the IrDA port if you attach an infrared module to this
connector. Refer to Integrated Peripherals in Chapter 4 for details.
3.5.4. LAN/Modem Wake up connectors (WOL1)
This 3-pin header is used for remote wake up of the computer
through a network or modem signal.
Attaching Connector
17