4xem BBPCHOME User Manual - page 63
BIOS Configuration
Wake-Up by PCI card : This setting enables/disables PCI card
wakeup for PCI spec2.2. The default is “Enabled.”
Power On by Ring : When set to “Enabled,” any activity on the
Modem port will wake up the system from a power saving mode. The
options are “Disabled” and “Enabled” (default).
Wake Up On LAN : When set to “Enabled”, the system power will
be turned on if the LAN port receives an incoming signal. Default
setting is “Enabled.”
USB KB Wake-Up From S3 : Use this item to enable USB
activity to wakeup the system from a power saving mode.
The default setting is “Disabled.”
Resume By Alarm : When set to “Enabled,” you may set the date
(day of the month), hour, minute and second to turn on your system.
When set to set “0” (zero) for the day of the month, the alarm will
power on your system every day at the specified time. The default
setting is “Disabled.”
Date
Time
**Reload Global Timer Events**
Global Timer (power management) events are I/O events whose
occurrence can prevent the system from entering a power saving
mode or can awaken the system from such a mode. In effect, the
system remains alert for anything that occurs to a device that is
configured as Enabled, even when the system is in a power down
mode.
Power Management Setup
55