4xem BBPCHOME User Manual - page 59
BIOS Configuration
from “SPP”(default) to the enhanced mode only if your peripheral
device can support it.
EPP Mode Select : Sets the EPP specification. There are two option
“EPP1.7”(default) and “EPP1.9”.
ECP Mode Use DMA : When the onboard parallel port is set to
ECP mode, the parallel port can use DMA “3” or DMA “1”.
Game Port Address : Enables you to specify the I/O address of the
game port. Options are “Disabled”,”201”(default), and “209”.
Midi Port Address : Enables you to specify the I/O address of the
MIDI port. Options are “Disabled”,”330”(default), and “300” and
“290”.
Midi Port IRQ : Enables you to specify the IRQ address of the
MIDI port if installed. Option are “5” and “10”(default).
After you have mode your selections in the BIOS Features Setup
screen, press
Integrated Peripherals
51