4xem BBPCHOME User Manual - 3. Hardware Installation
Introduction
3. Hardware Installation
This chapter explains how to use your motherboard to build a powerful
computer system. At a minimum, you will need the following components
in order to build a fully functioning system.
z
Computer case with P4 special ATX power supply
z
mPGA478B Processor
z
One DDR SDRAM memory module
z
One UDMA-66/100 IDE hard disk drive
z
One CD-ROM drive
z
One display monitor
z
One mouse
z
One PS/2 keyboard
z
One S/PDIF
z
One S-Video ( optional )
z
One TV-out & DVI ( optional )
z
One 1394
z
One S_ATA ( optional )
z
One LAN / Modem
z
One set of loudspeakers
z
Four USB
3.1. Unpacking
The BBPCHOME
motherboard package contains the following
items:
z
One motherboard
z
One ATA100 5.5cm IDE cable (3.5’ HDD)
z
One ATA33 10cm IDE cable (slim CD-ROM)
z
One 15cm power cable
z
One 1x8, 5cm LAN cable ( optional )
z
One 2x9, 28cm DVI & TV-out cable ( optional )
z
Driver and utility CD with User’s manual inside
After removing the motherboard from its anti-static bag, place it on
a grounded or antistatic surface (component side up). Inspect the
motherboard and contact your vendor immediately if it is damaged.
13