4xem BBPCHOME User Manual - 3.5.5. Ide Connectors
Manual is about: 4xem BBPCHOME: User Manual
of
77
Mainboard User’s Manual
3.5.5. IDE Connectors
Connect “Extended Connector Board” to motherboard firstly.
The length of 5.5cm ATA100 IDE cable, one side to connect to 3.5”
HDD connect over the “Extended Connector Board”, another side to
connector to 3.5” HDD.
The length of 10cm ATA33 IDE cable, one side to connect to the
slim CD-ROM over the “Extended Connector Board”, another side
to connect to slim CD-ROM.
Connect the slim HDD to slim HDD connector over the “Extended
Connector Board”. Since slim HDD and slim CD-ROM use the
same channel. You should separate the master and slave.
S_ATA(serial ATA) ( optional ) and parallel(IDE) HDD can be used
simultaneously. Also, they can copy each other.
Attaching Connector
18