4xem BBPCHOME User Manual - page 71
BIOS Configuration
4.10. Load Fail-Safe Defaults Option
This option opens a dialog box that lets you install fail-safe
defaults for all appropriate items in the Setup Utility:
Press
then
place no great demands on the system and are generally stable. If
your system is not functioning correctly, try installing the fail-safe
defaults as a first step in getting your system working properly
again. If you only want to install fail-safe defaults for a specific
option, select and display that option, and then press
4.11. Load Optimized Defaults
This option opens a dialog box that lets you install optimized
defaults for all appropriate items in the Setup Utility. Press
and then
demands on the system that may be greater than the performance
level of the components, such as the CPU and the memory. You
can cause fatal errors or instability if you install the optimized
defaults when your hardware does not support them. If you only
want to install setup defaults for a specific option, select and
display that option, and then press
4.12. Set Supervisor/User Passwords
The “Supervisor/User Password” utility sets the password.
The motherboard is shipped with the password disabled. If you
want to change the password, you must first enter the current
password, then at the prompt enter your new password. The
password is case sensitive. You can use up to eight alphanumeric
characters.
Load Fail-Safe Defaults Option
63