ABB RED615 Product Manual - page 28
ABB
8
Line Differential Protection and Control
RED615
Product version: 1.1
1MRS756500 A
22.Accessoriesand
orderingdata
Mounting accessories
Item
Order nr
Semi-flush mounting kit
1MRS050696
Wall mounting kit
1MRS050697
Inclined semi-flush mounting kit
1MRS050831
19 ” rack mounting kit with cutout for one IED
1MRS050694
19 ” rack mounting kit with cutout for two IEDs
1MRS050695
Mounting kit for RTXP 18 (4U Combiflex)
1MRS051010
Mounting kit for 4U high Combiflex equipment frame
1MRS050779
Test switches
Item
Order nr
Mounting kit for 19” rack, single IED, including test switch
RTXP 18
1MRS050783
23.Tools
The IED is delivered as a pre-configured unit.
The default parameter setting values can be
changed from the front-panel user interface,
the web-browser based user interface (WebH-
MI) or the PCM600 tool in combination with
the IED specific connectivity package. The
connectivity package for RED615 includes a
tool for line differential protection parameter
visualization which supports fault-record
based IED performance analysis.
PCM600 offers extensive IED configuration
functions such as IED signal configuration
using the signal matrix tool, and IEC 61850
communication configuration including hori-
zontal peer-to-peer communication, GOOSE.
When the web-browser based user interface
is used, the IED can be accessed either lo-
cally or remotely using a web browser (IE
7.0 or later). For security reasons, the web-
browser based user interface is disabled by
default. The interface can be enabled with
the PCM600 tool or from the front panel user
interface. The functionality of the interface
can be limited to read-only access by means
of PCM600.
Tools
Configuration, setting and SA system tools
Version
PCM600
2.0 SP1 or later
Web-browser based user interface
IE 7.0 or later
RED615 Connectivity Package, including the line
differential characteristics tool
1.0 or later
Station Automation Series COM600
3.2 or later
MicroSCADA Pro
9.2 SP1 or later