Ablephone AP-6000 User Manual - page 10
A.
Pick up the handset. If names are stored, Dialer asks you for a
name to call. Press the pound key (#).
B.
While hearing the main menu, press the '7' key to toggle between
'handset mode' and 'speakerphone mode'. Select 'speakerphone
mode'.
Working with the Clarity RC200 speakerphone
Dialer has a unique operational mode, called "Basic" which is
specifically designed to work with the RC200 speakerphone. In this
mode, after you press the speakerphone button (or pick up the
handset), Dialer will silently wait for the pound key (#) to be pressed.
Only after that key has been pressed will Dialer resume normal
operation, such as asking for a name to dial or reading the menu. This
pound key (#) will be transmitted from the RC200. Follow these easy
steps to activate the “Basic” mode:
In Dialer:
A.
Pick up the handset. If names are stored, Dialer asks you for a
name to call. Press the pound key (#).
B.
Upon hearing the main menu, press the '9' key to toggle between
'Basic mode' and 'Freedom mode'. Select 'Basic mode'.
In the RC200:
A.
Follow the manufacturer’s instructions on how to set up
the RC200; and make sure that the phone, the remote
control, and any other optional accessories work. Be sure to
turn off the scan feature, as described on page 5 of the
manufacturer’s instructions for the RC200.
B.
Program only the first memory location with a single
pound key (#).
Now connect the RC200 to Dialer, as described in Chapter 1 of this
manual for any other telephone. Please note that, if you wish to add
names, you will be required to use the RC200 keypad.
To place a call, give the remote control a short press and wait for Dialer
to ask you for a name to call. To end the call, press the remote control
again.
Working with a PBX
There are situations where Dialer is not connected directly to a phone
line, but rather to a Private Branch eXchange (PBX). A good example
is a nursing home. To get an outside line, one usually needs to dial a
10