Ablephone AP-6000 User Manual - page 9
Chapter Two
This chapter describes how to dial a number during a call, work with
a speakerphone, enable Dialer to work when connected to a Private
Branch eXchange (PBX), and change the spoken language.
Dialing a number during a call
(currently works only with the US / UK languages selected)
While in a call, you can activate the name-dialing or digit-dialing
function again in order to transmit DTMF tones needed for online
banking services, calling cards, etc. To activate this feature, do the
following:
A.
Pick up the handset. Dialer asks you for a name to dial. Say the
name you wish to dial. Dialer dials that name.
B.
While in the call, stay silent for a second (make sure the other
party is silent as well), and say "activate dialing".
C.
Dialer will now engage again and will ask you for a name to dial.
Say the name you wish to dial during the call. Dialer will transmit
the number to the line.
D.
If you wish, you can repeat this process over and over again.
Simply return to step B above.
E.
You can also say digits, and Dialer will transmit your digits to the
line. Once you say the first digit, you can continue and say more
digits, without the need to say "activate dialing" between each
digit.
Example: Say you wish to access your account status using your
bank's automatic telephone service. You can store your bank
telephone number under the name "bank", your account number
under the name "account", and your pin code under the name "pin".
Then voice dial to your bank; and, when asked to punch in your
account number, simply say "activate dialing". Dialer will ask you
for a name to dial. Say the name "account", and Dialer will transmit
the tones of your account number to your bank. Then, when asked
to punch in your pin number, say "activate dialing" again followed
by the name "pin". This method can be used in other situations that
require dialing a number during a call.
Working with a Speakerphone
Dialer can be connected and used with a speakerphone. Since
working with a speakerphone usually means that the voice signal
level coming from the user will be lower then when working with a
handset, it is recommended (but not mandatory) that you change
Dialer's microphone mode by following these steps:
9