– 1 – rm20 rauchwarnmelder mit hitzewarnfunktion bedienungs-, installations- und wartungsanleitung rauchwarnmelder mit hitzewarnfunktion d user manual smoke alarm device with heat alarm function gb consignes d‘utilisation et d‘installation détecteur d‘alarme de fumée avec signal d‘avertissement de c...
– 12 – rm20 smoke alarm device with heat alarm funktion user manual smoke alarm device with heat alarm function gb 390371_moanltg rm 20_d_gb_f_nl_i_11.2012.Indd 13 14.11.12 13:16.
– 15 – – 15 – contents thank you 15 start-up 16 function 16 choosing a location 16 battery error message 17 assembly 18 adhesive mounting 18 mounting by drilling 18 general safety guidelines 19 inspection and maintenance 20 equipment life 21 possible causes of a fault alarm 21 warranty 22 intended u...
– 15 – – 15 – thank you ! We are pleased that you have chosen to buy our product and thank you for placing your trust in our company! Youhavemadeagooddecision. This household smoke alarm has been developed and manufactured with the utmost care, so that you can bemadeawareofafireriskinyour homeinduet...
– 16 – – 17 – commissioning first of all, remove any activation safeguards(e.G.Acotterpin)and make sure that the activation safe- guard does not get into the device! Then press the device’s activation button(fig.1,i.)whichisshownin thepictureonpage15.Afterthe button has been pushed in, it must beflu...
– 16 – – 17 – as a minimum requirement rm , smoke alarms should be installed in all bedrooms, children’s rooms and corridors that function as escape routes, only in the middle of the ceiling(nowallmounting). Choose the highest point to install the unit, ensuring that it is posi- tioned at least 50 c...
– 18 – – 19 – approx.10seconds. Then you can place the device on the magnet carryingframe(fig.1,iii.).The adhesive bond will reach its ultimate strengthafterapprox.72hours. Drilling drill a hole into the installation surface with a 6 mm drill bit and insert the supplied 6 mm wall plug intothehole.Gu...
– 18 – – 19 – screw too tightly as this could deform/distortthemagneticmount. General safety information although smoke alarms can help you todetectafireearlyon,theycannot extinguishafire,preventafirefrom occurringoralarmthefirebrigade. Intheeventoffirefume-relatedrisk, smoke alarms emit a loud alar...
– 20 – – 21 – important note: the smoke alarm is only able to provide a warning, and potentially save lives, if it is located in its intend- ed installation position, is free from dirtanddamageandisactivated. Testing and maintenance the smoke detector automatically checks that it is operating correc...
– 20 – – 21 – place and that the smoke inlet ribs (ii) are completely free from any foreignbodies.Usefulinformationon regular maintenance and choosing an opti- mum location for installation can be found in the application standard for smokealarms,din14676. Equipment life at least every 12 years repl...
– 22 – – 23 – warranty • abus products are designed, manu- factured and tested in accordance with applicable regulations with greatcare. • the warranty exclusively covers faults that are caused by material or manu- facturingdefects.Ifamaterialor manufacturing defect can be proven, the smoke alarm wi...
– 22 – – 23 – declaration of conformity this product has been inspected and cer- tifiedasaconstructionproductinaccord- ance with en 14604:2005/ac:2008 in linewithdirective89/106eec. Production is monitored through regular independent checks for consistent obser- vanceoflegalandstandardregulations. T...
– 24 – notes 390371_moanltg rm 20_d_gb_f_nl_i_11.2012.Indd 24 14.11.12 13:16.
