AccuEnergy Accuvim II User Manual - page 14
Manual is about: Ethernet modules
of
58
Ethernet Modual
Note:
1. lightly in installation or it may cause damage to the IO modules;
2. Installation with power is forbidden.
2.3 Definition of RJ45 Interface
The Ethernet module uses standard RJ45 connector access Ethernet
network. The mechanical and electrical characteristics of connector are
consistent with the requirements of IEC 603-7.
（
Top View
）
Script
ID
Content
1
TX+
Tranceive Data+
2
TX-
Tranceive Data-
3
RX+
Receive Data+
4
n/c
Not connected
5
n/c
Not connected
6
RX-
Receive Data-
7
n/c
Not connected
8
n/c
Not connected
LED_L (yellow):
display speed status. LED on indicates 100Mbps, while