AccuEnergy Accuvim II User Manual - page 18

1

Ethernet Modual

Detail of Ethernet module will be described in this chapter. It includes 

how  to  set      parameters  of  module,  how  to  get  IP  address  and  Mac 

address of module, content about Modbus/TCP protocol, how to visit 

webs, and how to use mail function. 

3.1 Initializing Ethernet Module

AXM-Net default settings are

IP Address (192.168.1.254); 

Subnet Mask (255.255.255.0); 

Gateway (192.168.1.1);

Primary DNS Server (202.106.0.20).

If you don’t know the settings of module when power on for the fist time, 

you may use the panel of Acuvim II to get them and to configure them.

This  procedure  shows  how  to  configure  Ethernet  module  settings  by 

panel:

a) Press “H” key and “V/A” key simultaneously on Acuvim II will go to the 

menu selecting mode. Cursor “Meter” flashes in this mode.