AccuEnergy Accuvim II User Manual - page 38
Ethernet Modual
Response
The normal response to a preset Multi-Register request includes MBAP
Header, function code, data start register, the number of registers.
Transaction
identifier hi
Transaction
identifier lo
Protocol
identifier hi
Protocol
identifier lo
Length hi Length lo
Unit
identifier
00H
00H
00H
00H
00H
06H
01H
Fun
Data start reg hi Data start reg lo Data #of regs hi
Data #of regs lo
10H
10H
08H
00H
02H
Table 3-14 Preset Multi-Registers Response Message
Users may refer to the fifth chapter “Communication” and get the details
of Acuvim II.
When users use Moubus/Tcp function, you set best the Scan Interval of
tool soft under 1000ms, and set best the Frame Interval of the third soft
under 1000ms.
3.4 Browse Webpage and Set Parameters
Ethernet module supports HTTP protocol, has Web Sever function. Users
may visit Acuvim II through Ethernet whenever and wherever.
Ethernet module supports IE Browser 5.0 and above editions and Webpage
Settings only supports ASCII character.
We assume “
192.169.1.200
” as IP address of module.
Figure 3-17 is flow chart for entering webpage.