AccuEnergy Accuvim II User Manual - page 25
Manual is about: Ethernet modules
of
58
1
Ethernet Modual
h) Set DNS Secondary Server in the sixth setting page, such as
202.106.196.115. Press “V/A” key, go to setting state. Users may set
parameter in the pointed area, and cursor starts at the first digit bit.
After setting DNS Secondary Server completely, press “V/A” key to affirm.
Again press “P” key, go to the seventh setting page for Modbus/TCP port.
Note: if you want to use SMTP function, DNS parameters must be set
correctly.
Figure 3-10