AccuEnergy Accuvim II User Manual - page 19
Manual is about: Ethernet modules
of
58
1
Ethernet Modual
Figure 3-1
b) Press “P” key or “E” key, move cursor to “Setting”. Press “V/A” key,
go to the meter parameter setting mode. Device address page is the first
page of “Setting” mode. It shows the Modbus address of the device for
several seconds, and then the screen goes to Access Code page. Press “V/
A” key, go to the parameter setting page. Press “P” key or “E” key, move
cursor to “NET”, press “V/A” key, go to Ethernet module setting page.
Figure 3-2