AccuEnergy Accuvim II User Manual - page 42
Manual is about: Ethernet modules
of
58
Ethernet Modual
1) “Password” Webpage
Figure 3-21: “Password” webpage. If the password is valid, IE Browser
will enter “Network Settings” webpage, or else IE Browser will return to
“Password” webpage.
Figure 3-21
2) “Network Settings” Webpage
Figure 3-22: “Network Settings” webpage. It supports two network
setting mode: Manual or Auto. Except network setting mode, there are
two port settings in Webpage. One is HTTP port, and the other is Modbus/
TCP port. The default value of Modbus/TCP port is 502, and the user
defined range is 2000~5999. The default value of HTTP port is 80, and the
user defined range is 6000~9999.
After new network settings go into effect, users may enter webpage
according to new IP address.
(6-12word)