Acecad DigiMemo L2 User Manual - Turning Off The Digital Pad
Number
to the one same as you wrote on the paper page. Now, start to write! Through
this way, your new handwriting will be captured and stored in the right digital page.
Erasing a Digital Page on the Digital Pad
Erasing a digital page is similar to tearing off a paper page. By using the or
function button to move the
Digital Page Number
to the one which you want to erase.
Then press the
Erase
button
on the pad. The display will show
message. Press the
Erase
button
again to erase all contents stored in the digital
page.
Here is a brief recommendation: you may want to tear off the paper page or simply
cross out the page number you wrote on the paper page.
Note! When
message appears, the erase procedure will be cancelled if
you write or press any button
,
or to execute other functions. All
contents remain intact in the digital page.
Note!
Once a digital page is erased, its original contents can not be recovered.
Turning off the Digital Pad
Press the
Power
button to turn off the digital pad. The display will be blank.
If you have not written or pressed any function button within the previous 30 minutes,
the digital pad sounds a beep and automatically shuts down. The display will be blank.
Note!
Since the pad has the automatic shutdown capability, please make sure that
the display is on if you want to write again after a long period of time.
As you turn on the digital pad, the display will show the last
Digital Page Number
at the
time it was turned off.
Setting the Date and Time
The dates created and modified for the digital page file are recorded according to the
clock in the digital pad.
1. Turn off the digital pad.
2. Press and hold the button on the digital pad. Then press the
Power
button until
the year digits flash on the display.
3. Repeatedly press or hold down the
or button to set the year.
4. Press
the button. Then the month digits flash.
5. Repeat Step 3 and 4 to set the month, day, hour, minute, second and year
cyclically.
Note!
Only 24-hour format is available.
6. Press
the button during the setting. The date and time adjustment will be stored.
Then the digital pad will be turned on and the current time appears on the display.
Note! If you turn off the digital pad during the setting, the date and time
adjustment will be not stored. The clock automatically returns to the
previous setting.
6