Acecad DigiMemo L2 User Manual - page 28
Solution
: Please purchase and use an ink cartridge which we recommend.
Question:
The digital pad can not be turned on.
Solution
: Please verify that the digital pad is not connected to your computer.
Question:
After using for a period of time, you can not turn on the digital pad.
Solution
: The batteries in the pad may be exhausted. Please replace the batteries.
Question:
After replacing the batteries of the digital pad, the date and time in the pad
are incorrect.
Solution
: When you replace the batteries in the pad, no battery in the battery
compartment may be over one minute. The adjusted time and date are
erased. Please reset the date and time.
Question:
After you load an optional SD memory card into the digital pad and then turn
on the pad, the Storage Device icon
is not shown on the display. The
display still shows the Storage Device icon
.
Solution
: Make sure that you insert the memory card correctly into the SD card
insertion slot of the pad.
Question:
The Storage Device icon
flashes on the display.
Solution
: When a SD memory card with the write-protect switch set to LOCK is
inserted into insertion slot, the pad sounds 2 beeps and the Storage Device
icon
flashes on the display. Please remove the SD memory card with
the write-protect switch set to LOCK.
Question:
Even though the stored digital pages have not reached 999, the memory
(either in the built-in 32 MB storage device or in an optional memory card) is
full.
Solution
: Although the digital pad has the ability to manage up to 999 digital pages
(either for the built-in 32 MB storage device or for an optional memory card),
such ability is unrelated to the maximum storage capacity.
The full memory means that the used space for the digital page files and the
other computer files reaches the maximum capacity of the built-in 32 MB
storage device or an optional memory card.
Question:
When pressing the Next Blank Page button , the current digital page does
not move to the next blank digital page and the pad sounds 2 beeps.
Solution
: In the DMEMO-M or DMEMO-S folder in the current storage device (the
built-in 32 MB storage device or the optional memory card), there are
already 999 digital page files containing digital ink. Move or delete some
digital page files in the folder.
22