Acecad DigiMemo L2 User Manual - The Error Code E02
20
remove the SD memory card from the pad.
To reset the built-in 32 MB storage device, execute the following steps:
c
Press and hold the Erase button X.
d
Press and hold the Power button until the
icon
appears on the display.
e
Release the Power button.
f
Release the Erase button X.
g
When the reset is finished, the digital pad will be turned
on. The display will show the current digital page 001 with
no digital ink in the built-in 32 MB storage device (if no SD memory card is
present in the pad).
Note!
Do not format the built-in 32 MB storage device through the format function in
computer. Or it will cause the incompatibility problem with the pad.
The File System Incompatibility of an Optional SD Memory Card —
the Error Code E02
If the error code
E02
appears on the display of the digital pad, it indicates that the file
system of the optional SD memory card is incompatible with the digital pad. If you want
the digital pad to capture and store your handwriting in this optional SD memory card,
please format this memory card before use.
Note!
Formatting an optional memory card permanently deletes all data and files it
contains. Before formatting, be sure to transfer to a computer any files you
would like to keep.
To format an optional SD memory card, execute the following steps:
1. Load the memory card into the digital pad.
2. Turn on your computer.
3. Connect the digital pad to your computer.
4. Format the memory card with the file system
FAT
.
Note!
The digital pad only supports an optional SD memory card with the file system
FAT. The digital pad does not support an optional SD memory card with other
file system.
The Damage or Incompatibility of an Optional SD Memory Card —
the Error Code E01
If the error code
E01
appears on the display of the digital pad, it indicates that the
optional memory card may be damaged or the memory in the memory card is
incompatible with the digital pad. You can not use it with the pad.
The Full Root Directory — the Error Code E06
If the error code
E06
appears on the display of the digital pad, it indicates that too many
files or folders in the root directory in the built-in 32 MB storage device or the optional
SD memory card. Move or delete some files or folders in the root directory.
c
d
f
e